Expert Answers about Boat Motor Accessories

• Roller Bunks for 15 Foot Flat Bottom Aluminum Boat Weighing Around 1,200 to 1,500 Lbs
• The 5' Dutton-Lainson Boat Trailer Deluxe Roller Bunks, part # DL21741 have a combined capacity (for the pair) of 3,000 lbs. This means that they would have absolutely no problem supporting the weight of your 15' aluminum flat bottom boat and will make a huge difference in improving the ease of loading and unloading the boat on your trailer and into the water. To install them, you'll also need some roller bunk brackets, part # DL21742.
  view full answer...


• Choosing BoatBuckle G2 Retractable Ratcheting Transom Tie-Down Straps
• For your 1400-lb boat/motor I suggest you play it safe and use the 2-inch Ratcheting Transom Tie-Downs # IMF08893. These have enough capacity plus a nice safety margin. With items like tie down straps you always want to use them within their WLL, or working load limit. This is their actual real-world capacity, as compared to their breaking strength which is 3 times the WLL. The idea is to choose a tie down that will never be used near its break strength. None of us ever wants to be near...
  view full answer...


• Appropriate Tongue Weight Range for Boat/Trailer with Combined Weight of 6310-lbs
• In general a properly loaded trailer will have a tongue weight (TW) that is between 12- and 15-percent of its gross weight, its GVWR. Keeping the TW in this range tends to result in the best handling characteristics with the least trailer sway. On a boat trailer TW can be a bit more complicated. An outboard motor, which naturally hangs at the extreme rear of the trailer, can have a substantial impact on your actual TW. The same boat with a 100-horse motor versus a 300-horse motor will...
  view full answer...


• What Is Weight Capacity Of Yates Keel Roller For Boat Trailers
• I called my contact at Yates Rubber and asked about the Keel Roller for Boat Trailers, part # YR1200Y. They told me that the weight capacity is 400 lbs. They also said that they are typically used to help as a guide and the bunks normally handle the bulk of the boat and motor weight. I recommend roller bunks like part # DL21741. These are 5 ft long roller bunks that can be attached to your wooden bunks on the trailer or attached to the trailer frame. These roller bunks have a weight capacity...
  view full answer...


• Recommended Pole Tongue Adapter for Weight Distribution System on a Boat Trailer
• I spoke with my rep at Blue Ox and checked Reese's website both the Chain Hangers you mentioned item # BXW4023 and the Reese item # RP58393 only work with chain hanging type weight distribution systems. Since you were looking at the Blue Ox 2-Point Weight Distribution w/ Sway Control item # BLU47FR which has an 600 lbs - 800 lbs tongue weight range, I recommend the Blue Ox SwayPro Weight Distribution w/ Sway Control item # BXW0756. This system will be better suited for you boat trailer....
  view full answer...


• Can Inflatable Boat and Outboard Motor be Safely Carried on Aluminum Cargo Carrier on 2010 Mazda 3
• Based on what you have described the aluminum carrier should have no problem handling the 200 pound estimated weight of the carrier and boat/motor combined. You will just need to make sure not to exceed the capacity of the trailer hitch on your 2010 Mazda 3. Since you are right at the hitch capacity it would be a good idea to stow the motor in the vehicle it at all possible. You can reduce the stress on the hitch receiver by also using a stabilization strap such as # 18050, or another...
  view full answer...


• Will CE Smith Bolster Brackets Handle Weight of Boat
• Yes, the CE Smith Bolster and Swivel Bracket Assembly # CE10000G will accommodate the weight of your boat. The only thing you will need to install them are U-bolts such as part # CE15283GA-2.
  view full answer...


• Classic Accessories Boat Cover for a 1994 24 foot Monterey Boat
• The beam width of the Classic Accessories Boat Cover by StormPro, part # 052963889680, is 116 inches. The cover is not matched to specific boats, however, it is a semi-universal fit for boats between 22 and 24 feet long.
  view full answer...


• Can I Tow a Boat with the Stealth Hitch on a Tesla Model 3
• From what I'm able to find, the 2018 Tesla Model 3 has a towing capacity of 2000-lbs (likely very different for dual motor versions), but I do recommend confirming that with your owner's manual. With that said, the Stealth Hitch # 391TES317T is a great solution to tow a light weight boat with your 2018 Tesla Model 3. You'll need to know the total weight of the boat and trailer, as well as the tongue weight of the trailer to determine whether or not it is within the capacity of your Model...
  view full answer...


• Weight and Ease of Handling of Classic Accessories 9-Foot Pontoon Boat CA69660
• The Classic Accessories 9-Foot Pontoon Boat # CA69660 has a total weight of right around 71-pounds so it is certainly not much heavier than many well-equipped kayaks and canoes. But unlike those boats # CA69660 is made of three separate pieces, the two pontoons (that have quick inflate/deflate valves) and the sturdy tubular steel frame. This means that once you've finished your day's paddling you can easily separate those three components and handle each individually as you load them...
  view full answer...


• Selecting Proper Winch for Boat Trailer Carrying 1500-lb Bass Boat and Motor
• The correct rating of hand winch for use on your bass boat trailer will depend to a degree on whether it has carpeted bunks or roller bunks and on the degree of incline. Rollers bunks like Dutton-Lainson # DL21741 reduce the drag substantially and will allow using a lower-rated winch since rolling loads are easier to pull. If the trailer will typically be loaded when on a steep incline, then this will require a higher-rated winch than if it is typically used on nearly level ground. For...
  view full answer...


• What is the Weight and Weight Capacity of the Classic Accessories 9' Pontoon Boat # CA69660
• The Classic Accessories 9' Pontoon Boat # CA69660 that you referenced has a shipping weight of 75 lbs, it weighs in at 71-1/2 lbs, and it has a weight capacity of 400 lbs. The weight capacity includes any equipment you will be carrying with you so you may want to do some checking on the weight of your equipment if you think it may be close.
  view full answer...


• Capacity of Dutton-Lainson Boat Trailer Deluxe Roller Bunks
• Though your line of thinking is perfectly logical, unfortunately it is a bit more complicated. The # DL21741 roller bunks have a 3,000 lb capacity per set and because a 5,500 lb boat does not have its weight evenly distributed, there will almost certainly be more weight at the back of the boat assuming that's where the motor is, and there would be more than 3,000 lbs of weight on that set of bunks so it would not work for your particular application.
  view full answer...


• Are CE Smith V-Wing Bolster Bracket Pontoon Trailers # CE26244G Strong Enough for a Pontoon Boat
• Yes, the CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers # CE26244G that you referenced would be a great option for bolster brackets for your pontoon boat trailer as that is exactly what this product was designed to do. The 1/8 inch galvanized steel construction of this bracket would make it strong enough for your pontoon.
  view full answer...


• How To Pick Out the Correct Weight Rating Tire for a Trailer
• Since there is a total of 4 wheels on your trailer you will need to add up the weight of your boat and trailer and then divide that number by 4 to determine what weight capacity tire you should get. For more trailer tire information check out the FAQ I attached.
  view full answer...


• Recommended Roller Bunks for 600 lbs. Boat
• The Dutton-Lainson Boat Trailer Standard Roller Bunk # DL21754 has a combined weight capacity of 2500 lbs. for both bunk rollers. They can be mounted right on top of wooden bunks. Also, if you 'd like to remove the wooden bunks that are likely on your current trailer you will need the brackets # DL21762. You will need 4 brackets to mount the two roller bunks. I've attached the review video of the roller bunks for you to look at.
  view full answer...


• Tandem Axle Boat Trailer Loading for Proper Tongue Weight and Load Distribution
• Your tandem axle trailer's equalizers handle the task of evening out the load across the two axles. I noted that in your photo the axles appear to have different tires installed on each. It is best to use identical tires on both axles, meaning same type (bias or radial), same weight load range and naturally, the same size. If the tires are not all the same some will tend to work harder and may develop more heat, which is a tire's worst enemy. The hotter tire, the tire that is carrying...
  view full answer...


• How Heavy a Passenger Can Use Classic Accessories 9' Pontoon Boat CA69660
• The Classic Accessories 9' Pontoon Boat # CA69660 can easily handle an avid fisherman up to a 400-pounder so you have no worries about using this craft for your fishing outings. Your comfort is assured thanks to adjustable oar locks, foot rests and seat. A handy cargo basket is included too so you have a place for the beer cooler, tackle box and snacks. 2-piece aluminum oars come with it too. The boat comes in three main parts, the two pontoons and the tubular steel frame, so handling...
  view full answer...


• What Does Buyers Products 9-1/2" Wheel Chock w/ Recessed Chain Eye - Black Rubber # 337WC6810L Weigh
• The Buyers Products 9-1/2" Wheel Chock w/ Recessed Chain Eye - Black Rubber # 337WC6810L that you referenced is a 7 lb wheel chock that will do a great job on a boat ramp. If the ramp is really steep I would exercise caution still if the ramp is also wet at the time.
  view full answer...


• Will a Nylon Roller Affect the Weight Capacity of the Dutton-Lainson TW4000 StrongArm # DL25200
• Typically for boat winches the winch can pull a boat that is twice its rated capacity. If the trailer has good rollers then you could stretch that capacity to 3:1 but if you have wooden bunks it is best to stick to a 1:1 ratio. The nylon roller shouldn't affect the weight capacity of the winch and since the Dutton-Lainson TW4000 StrongArm # DL25200 is rated for over twice the weight of your loaded boat you will not have any problems at all. I have attached a review video and installation...
  view full answer...